Author: Terry

Diana Airbug Suppressors Are Here

We had close to 100 folks subscribed to the Diana Airbug suppressors and I somehow broke the back-in-stock notifier. So here is your notification! They are back… and they are different. I know not everyone will love the changes, but the functionality has been much improved. The fitment has been made more reliable, the finish dramatically improved, and it is now secured to the barrel with two set screws. Compatible with our UNI suppressors and thread protector.

Much of these changes were driven by customer feedback. I hope you like it as much as we do. The above airgun is my daughter’s and it has been well used.

I’m trying a new stock idea as well. What do you think? This style allows for much more customization in LOP, Carbine Tube or AR308 Tube, Side Folder or No, Fixed or Adjustable stocks, Milspec or commercial, and so on… It will be compatible with the Airbug, Bandit, and Chaser airguns and their non-US counterparts.

Thank you for your business and thank you for your support! It’s not taken for granted and we’re working hard to earn it.

Sincerely,

Terry

Just a quick update. I’ve just listed a couple of new products and have some project updates. Let me tell you about it.

Black Arts Design

We’re now offering Air Venturi Avenger Barrel bands from Black Arts Design. Gauge covers will be listed soon as well. David is a 3d printing wizard and his designs are top notch. I 3d print aerospace parts professionally with machines that cost over $400k and can tell you confidently that these are the smoothest FDM printed parts I’ve ever seen. Check those out here: B.A.D. Avenger Barrel Bands

M14x1.25 Suppressors

I’ve made quite a few of these suppressors for customers here and there when I have time for custom work. I figured I might as well just list them. I personally don’t have any airguns that use this thread pattern, but I’ve had customers use these on the AGN Uragan 2 and other high end PCPs. I have a bunch of .122/.22 caliber and a few .30 calibers. .25 cals are coming soon as well. Check those out here: M14X1.25 Suppressors

Crosman and Benjamin Airguns

Buck Rail has recently become an authorized repair center for many Crosman and Benjamin Airguns. This is great news for a few reasons. The obvious one is that Buck Rail will be able to do warranty work on your Crosman and Benjamin airguns. This also means we’ll be able to offer Crosman parts for the 2240 and 13XX including barrels, steel breeches, etc. along with the aftermarket parts we already offer and with Buck Rail service. The part that I’m most excited about though… This means the Benjamin P-Rod tactical conversion kit is happening soon. The kit requires that you remove the grip frame and trigger group and replace it with the very crisp trigger found on the Benjamin Marauder. Here’s a few previews from when I was prototyping that kit.

Seneca Big Bores

I’ve been working to develop a solid tactical conversion kit for the Seneca Dragon Claw and Recluse. Whether or not the kits will be sold alone or by Buck Rail is yet to be determined. I won’t be manufacturing the parts, as I’m at max capacity. It will likely end up being sold by CAP Arms on their CAP Dragons, but I thought y’all might like to see how that’s coming along.

Umarex Notos and Artemis PP750

I’ve just started working on a kit that will be compatible with the Umarex Notos and Artemis PP750. I’m taking a little different approach with these. It will be compatible with Milspec buffer tubes and AK side folders like the Seneca kit above. Now that we are reselling for Leapers we can make that more affordable to our customers. The price will likely be close to our other kits, but it will have a metal tube and side folder. Check it out! This is the first prototype.

Do you like the grip? Me too. I liked them so much that I reached out to Ergo Air to become a reseller so that we can offer them to our customers as well. They will likely be an upgrade option on some of our tactical kits and will be sold individually as well. Stay tuned for that!

That’s all I’ve got for now. Thank you for your business and thank you for your support! It’s not taken for granted and I’m working hard to earn it.

Sincerely,

Terry Harman

P.S. The 13XX, Underlever, and Avenger UNI adapters are all on order and only a couple weeks out!

Howdy Folks,

It’s been a while. I’m still not quite back to business as usual, but I have been busy with the business, as usual. I know a lot of folks have been waiting for us to release the JTS Airacuda Tactical Conversion Kit. I wanted to wait until I had the MAX kit ready as well, but it’s going to be a bit before I get some more design time. The kit for the JTS Airacuda base model is now available to ship. Check it out!

In other news

We now offer Diana Chaser Pistols in .177 and .22

I’ve also listed the pistols with tactical kits preinstalled. Instead of 3d printing these in my garage I have them made in industrial grade fused Nylon PA12 for a higher quality finish and higher strength. The kit includes chassis, grip, buttstock, suppressor, and 3 rotary mags. Check that out HERE.

I told y’all that I listed the Beeman Marshall Carbine kits in the last newsletter. I’ve now added the side folder option to those as well. We install the kits, clean the barrel, fill it, and run some lead through it to ensure it’s not a dud before shipping. Check those out HERE.

I’ve assembled a kit for replacing the spring roll pin in the 1377/1322 etc. Check that out HERE. It’s made up of off the shelf items, but conveniently bundled so that you don’t have to track the parts down yourself. I’ve also listed the parts you will need if you’re going to do it yourself. You can get the parts at your local hardware store. I’m only offering this because it has been a common request. I will be assembling a washer kit as well to take up the slack in the pump arm.

I’m phasing out Chinese buttstocks. We have a lot of good Made in USA options now:

– UTG Pro S3
– UTG Pro S4
– Magpul MOE
– Magpul Cheek Riser

We’ve added some more DonnyFL products. Check those out HERE.

Our friend Jason Hogueison requested a couple of barrel bands for his Kral Puncher Knight and NP-03 and loaned me his airguns to take measurements and test parts. I hade a few of the bands printed in Fused Nylon and have those listed as well. Check out Jason’s website HERE.

I’ve replaced our original direct fit Akela/Kratos Suppressor with an adapter for our UNI Suppressor. Check that out HERE.

I’m working with our polymer filament supplier to develop a Flat Dark Earth ABS filament. This will make it possible for us to offer many of our products in FDE. Hopefully the color comes out right. Stay tuned on that.

We have quite a few things out of stock right now. Part of that is high demand and part of that is bad management. I’m working on the bad management part. I’m not keen on raising prices, so I’m trying to get creative. These are problems I’m happy to have. Bear with me, y’all.

Thank you for your business, thank you for your support and the opportunity to serve y’all. I don’t take it for granted.

Sincerely,

Terry

P.S. Baby and family are happy and healthy. Thank you for all the kind words, folks.

New Products

Howdy folks. It’s been a bit since I talked at y’all. I’m still at it and have a lot of good stuff in the works. First off, I’m happy to announce that we are now selling and shipping DonnyFL suppressor adapters. We currently have six models on offer, but will likely supply whatever folks are requesting. If you’re already here to buy a suppressor, you might as well get the adapter from the same place all in one go. Also, If you buy the suppressor and adapter together, you get a discount. If you buy the adapter alone, you don’t get a discount, but you get free shipping. If none of those things appeal to you then go right ahead and get them from Donny. They’re a great American company and you won’t regret it either way. This is more of a convenience to our customers. Here’s what we’re starting with: Akela/Kratos, Kral Puncher Breaker, Marauder Rifle, Armada, Fortitude, Marauder Pistol, Avenger/Origin, Gauntlet, and Beeman Underlever. I chose these, because we already sell a lot of direct fit suppressors for these airguns. I will likely be discontinuing much of our direct fit suppressors to make room for other products that I’m working on and free up printers to work on other things.

Beeman 2027 Side Folders

I’ve made some changes to our Beeman 2027 grip adapter to improve the fit and function of the Poor Man’s Side Folder on that platform. The rear pic rail has been moved further rearward so that you can turn the Side Folder upside-down, clear the bolt, and get the hinge pin off of your hand/wrist. I should have done this before, but it simply didn’t occur to me until we started getting some complaints. An advantage of getting the side folder over the fixed stock is the ability to make adjustments to the hammer spring on the fly. Just fold the stock over, make your adjustment, and fold it back. If you mount our Micro Red Dot on it you can co-witness with the tall front sight post. It helps a lot with accuracy and developing a consistent cheek weld. I’m having a lot of fun with this platform.As you can see below, we’ve also added an M-Lok Handguard option for the Beeman 2027.

Marauder Pistol Side Folder

I’ve made a similar change to the Benjamin Marauder Pistol adapter. I’ve extended it rearward to clear the bolt as well. You can see what I mean in the picture below:

Like I said, I should have done this originally, but I didn’t. Sorry about that. If you own one of these in the older model I’ll be happy to replace it. Just reach out to Chris and he’ll get you fixed up with a replacement. Just be patient with us while I try to print enough for everyone who takes me up on it!

Other Projects

A long time customer suggested that we offer a fixed minimalist stock for the 13XX. I have working prototypes for the Marauder Pistol, Crosman 13XX, 2240, Diana Airbug, Bandit, and Chaser, and have one in the works for the Beeman 2027. In order to get an adult LOP they need to be longer than most of my printers can print. The printers that I print the Stormrider and Avenger Handguards on are working 24/7 to keep up with Avenger kits. I’ll need to get more of those printers setup, which means I need more power, which means it may be a bit, but I’m on it and it’s going to happen. I’m thinking I’ll provide two different buttpads to suit different preferences. Below is the prototype for the PRod.

Tactical Conversion Kits

A lot. Too many to say. I’ll get myself in trouble if I told you all the airguns I’m planning on tackling. Just know that I’m working on it and there will be a lot of news to come on those.

Suppressors

As I said earlier, I’ll likely discontinue many of our direct fit suppressors, but I plan on replacing them with affordable options that can be manufactured more reliably. I have it mind to take the same approach I took with our Crosman 13XX suppressor. Very tough MJF Nylon adapters with a common full polymer suppressor. I would work with another manufacturer to make the many polymer adapters and I’ll just focus on the all polymer suppressor. I’m experimenting with Quick Disconnect threads and it’s looking very promising. None of these ideas are new, but there’s certainly nothing like it widely available on the market. I’ll be posting casual updates on Facebook and Instagram as I make progress on those.

That’s all I have for now folks. Thank you for your business and thank you for your support. I love what I do and will keep working hard at making great products at great prices for great customers!

Sincerely,

Terry Harman

Upgraded Diana Stock Tubes

I forgot about these until they arrived on my doorstep! The Diana Chaser, Bandit, and Airbug Stock Tubes have been upgraded! There is now no sanding required. It is much like our 13XX and 2240 stock tubes with a machined steel adapter, steel bolt, and printed tube. I just threw the old ones out. All orders that are shipped from now on will be shipped with the new tubes.

I’m sorry about the poor quality video. I rushed it out so I could get these to you before I go back to work!

If you’d like to upgrade from the old stock tube use coupon code DIANAUPGRADE for a 50% discount. This is only going out to our subscribers and this just to cover our costs. The coupon code will expire on Saturday, 12/24/2022!

Thank you!

Terry

UNF Suppressors, Avengers, 13XX, M-Loks, and Babies…

Howdy folks. It’s been a little while. I’ve done a few things since last I typed at you and have many projects in the works. I’ll tell you all about it. But first, let me break some baddish news. I’m going back to work. I’m a Machinist/Designer at Jacobs Technology in support of the JSC Engineering Technology and Science contract. But I’m only a temp. They reach out when they have extra work and I have the time. They recently reached out for help on a cool project, but it would be full time until February or March 2023. It’s a really cool job, but I don’t have the time. And my wife will be due for baby number SIX in April. I always overwork when we’re about to have a baby. I think that’s normal… Right? So anyway, I said “Yes….”

What does this mean for Buck Rail, you ask? Buck Rail will keep truckin’. We’re full steam ahead. My brother, Danny will keep the printers running and shelves stocked, my sister, Julie, will keep fulfilling orders with blazing speed, and my friend, Chris, will continue to be available for anything customer service related. However, I’ll stop making new products for a bit. As much as I love it, that will have to wait until I finish things out with Jacobs next year. Then we’ll see what happens with a brand new baby.

I have been busy designing new products. I will work at releasing them little by little in the coming weeks. I’ve already released two today.

UNF Suppressors

The first is a new option for our UNF suppressors. You can now choose a larger diameter 177/22 or 25 cal suppressor without the taper. Nothing special, but this has been a frequent request from our customers. It is the same diameter and length as our 30 cal suppressor.

1377/1322 Extended Barrel Bands

Another product that I’ve made for a while, but never sold is an extended barrel band for the Crosman 1377 and 1322. Quite a few customers have asked for this and I have sent them here and there without ever listing them. I never felt to good about selling them because they were so easy to break during installation. It never occurred to me until recently to have another company make it stronger with state-of-the-art technology that I don’t currently, otherwise, have access to. Enter Multi Jet Fusion. It’s as cool as it sounds. I’m not going to explain it here. You can google it. That’s how these are made. Made in Idaho, USA from tough Nylon PA12 via Multi Jet Fusion. The same material and process that is used to make our 13XX suppressor adapter. We only have 20 in stock, but we have more on order. Check out the Barrel Band here: https://buck-rail.com/product/1377-1322-extended-barrel-band/

Avenger Tactical Conversion

I have other items that have been designed and tested, but I’m working on getting enough printed to release them. One that has been in the works for a while is the Air Venturi Avenger Tactical Conversion. I’m sorry it’s taken so long, but I’m finally done with the design. Just need to dial in the prints and get a few parts in. Coming soon…

M-Lok Handguards

I’ve gotten a lot of requests for adding M-Lok slots to forearms, rails, etc. I was hesitant only because I didn’t expect 3d printed M-Lok slots to hold up under load. But I’ve done some testing and the results are fantastic. I want to put M-Loks on everything now. It allows for so much more customization, provides for a more comfortable handhold, and they look slick! Check out these prototypes for the Stormrider, Chaser, Bandit etc.

A few more noteworthy points. We will be in a feature article in Airgun World Magazine soon for our Beeman 2027 Tactical Conversion kit. Pretty cool. Keep a lookout for that. Also, we fulfilled 95 orders today! I never imagined that we would be at this point when I started all this. Especially all out of our little house and garage! I know, Lord willing, we have much more growing to do yet. Thank you for your support and thank you for your business! I don’t take it for granted. Until next time, we’ll be working hard to provide great airgun products at great prices.

-Terry