This suppressor is 3d printed in super tough Polycarbonate plastic. It features 7 cone-shaped baffles with an expansion chamber at the muzzle exit. The threads are reinforced with a 1/2″-20 steel solid-walled EZ Lok insert. It was was originally tested on the Walther Parrus .177 Caliber Rifle and Crosman 2240XL, but is meant to be compatible with any 1/2″-20 threaded airgun muzzles and adapters and has since been used on many high-powered PCPs. You can select from .177/.22, .25, or .30 caliber options and choose between our smaller diameter tapered suppressor or our larger diameter suppressor without taper.
Do you need an adapter for your airgun? Check here for compatible adapters from DonnyFL (these are sold and shipped by us): https://buck-rail.com/product-category/threaded-adapters/
If you have any issues with accuracy, it may be that you got a bad unit. We do make mistakes, but we’re always willing to make it right. Just let us know and we’ll take care of you! If you are buying this for a JTS Airacuda Max we recommend that you get one caliber size up. The Max has had some issues with adapter misalignment that leads to clipping, etc.
View the video below for more info:
PLEASE NOTE: This suppressor has been improved since publishing this video. I have added a honeycomb texture to the exterior, changed from helical insert to solid-wall EZ Lok insert, and increased internal volume without changing overall length or outside diameter.
Take a look inside the .177/.22, .25 model section below. It is shown here without the steel insert. The suppressor diameter is 1.2 inches and the length is 6.25 in:
Here’s a look at the larger .177/.22, .25, and .30 cal model section without taper. It is shown here without the steel insert. The suppressor diameter is 1.46 inches and the length is 6.25 in: