Description
This suppressor is 3d printed in super tough Polycarbonate plastic. It features 7 cone-shaped baffles with an expansion chamber at the muzzle exit. The threads are reinforced with a 1/2″-20 steel solid-walled EZ Lok insert. It was was originally tested on the Walther Parrus .177 Caliber Rifle and Crosman 2240XL, but is meant to be compatible with any 1/2″-20 threaded airgun muzzles and adapters and has since been used on many high-powered PCPs. You can select from .177/.22, .25, or .30 caliber options and choose between our smaller diameter tapered suppressor or our larger diameter suppressor without taper.
Do you need an adapter for your airgun? Check here for compatible adapters from DonnyFL (these are sold and shipped by us): https://buck-rail.com/product-category/threaded-adapters/
If you have any issues with accuracy, it may be that you got a bad unit. We do make mistakes, but we’re always willing to make it right. Just let us know and we’ll take care of you! If you are buying this for a JTS Airacuda Max we recommend that you get one caliber size up. The Max has had some issues with adapter misalignment that leads to clipping, etc.
View the video below for more info:
PLEASE NOTE: This suppressor has been improved since publishing this video. I have added a honeycomb texture to the exterior, changed from helical insert to solid-wall EZ Lok insert, and increased internal volume without changing overall length or outside diameter.
Take a look inside the .177/.22, .25 model section below. It is shown here without the steel insert. The suppressor diameter is 1.2 inches and the length is 6.25 in:
Here’s a look at the larger .177/.22, .25, and .30 cal model section without taper. It is shown here without the steel insert. The suppressor diameter is 1.46 inches and the length is 6.25 in:
On my Barra 1000z it made a huge difference because the rifle was really loud out of the box.
I also ordered the Berman marshal kit. I will share my thoughts once I receive.
The non tapered one shot great with no point of impact shift when installed on my 25 caliber Air Venturi Avenge-X, however the tapered on was clipping and I could not hit a 3'x4' paper at 50 yards . I contacted Terry at Buckrail and he sent me a new one that worked great ( no point of impact shift ) .
I highly recommend Buckrail it is a fantastic product which tames the report from my 25 caliber pcp and Terry stands behind his products 100% . And the price beats anything on the market .
Although I don’t have a ton of shots through it, I can tell you one thing, I shot a felt cleaning pellet through my Airacude Max .30 cal without Anything, including the original baffle system and WOW ! You would’ve thought I shot something louder than a rim fire off, It was extremely loud ! I had to go inside and hide out for a little bit. I then install the Donnyfl adapter and Buck Rails .30 cal can and shot a couple of JSB’s through a Riton scope that I just threw on and hadn’t been zeroed yet you wanna talk about night and day ! It was so quiet ! The only sound I could hear was that heavy 30 Cal pellet hitting that , I truly feel I could shoot this all day long in my backyard, in a heavy populated neighborhood, of course with .22 cal rimfire bullet box and some downward shots, Got to be super safe especially in the neighborhood.
Haven’t checked for accuracy yet but was able to put two pellets in the bullet box at 20 yards , I will check after sight in and report back if I find any issues.
On top of all of this, UPS wasn’t careful with my package and got a small blemish to the end of the can in shipping and was sent out a new one the very next day, Hell, their customer service is worth the cost of the can alone!
Long story short if you wanna try a can on your airgun no matter what caliber you carry give this a shot. I think you’ll be highly surprised then maybe down the road save up for that $200 can because let’s be honest, the only thing that makes this any different from a high dollar can is the fact that it’s got 3D print wrapped around it so long-term use may not be there but how many cans can you buy for $200 or more.
Then again, maybe long-term use is there,I just don’t know that yet.
When the same rifle had a .22, 24", Disco SE barrel on it, one neighbor saw me target practicing at the crack of dawn; but, I doubt she heard the shots I was firing.
I have no doubt the non tapered version I just recently acquired will ensure further ignorance of my target practice habits from my neighbors.
These are excellent budget moderators, they are almost as quiet as my 5 times more expensive aluminum ones. I will be buying more!
I can’t thank them enough. Jim
The action of the gun is louder than the report out the muzzle, Great product
Beeman Underlever .25
Makes barking PCP back yard friendly
I put it on my Jet One with full pressure, the first shot was too loud but I figured that was probably the sound of the wood behind my target so I cushioned it with a box and newspaper and shot again still too loud so I kept cushioning it with the same results.
Do you have any recommendations for another suppressor that you make?
Could it be that my Jet one with high pressure air is too much for this suppressor?
Thanks Buck rail!!!
The price is definitely right at $35-$40 for the suppressors that I bought .
Thanks,
Eddie-Eduardo
I bought this particular one to do a faux wrap on so that it closely matches my PB. This never fails to get a lot of looks on range days and I want my M60b to look just like it.
The large OD and straight walls gave me a fantastic grip face for the wrap to cling to and keep it secure.
Quiet? Absolutely! As good or better than anything I own. There is more sound coming back from the target and mechanical sounds from the action than there is from the report.
Fantastic work as always!
Threads on easily with the Crosman 1/2-20 Threaded Adapter sold here.
At first I thought it was still a little loud, but that may have been my fault. I think I had a little oil in the barrel which was igniting. After 5 or 6 shots, my gun is now making little more than a "click" sound. Absolutely fantastic performance.
USAF, DOD, Retired
Randall Stennett
for my Crosman AK1 - FULL AUTO BB RIFLE works great and looks badass on the gun. The second suppressor is on my Barra 1100z and performs perfectly. Also enhances the appearance 100%.
Thanks again for your quality products! I am a Happy Customer.....
JW n TN
Thanks, Steven S.
Thanks,
Fleming
great job guys 👍
That right there is the definition of customer service far beyond what they should have done.
Much quieter. 5stars specially at the price. 250$ for a moderator would be really unreasonable for an entry level rifle.
I had an issue with one of their products and they went many steps above and beyond to resolve the issue. It is not often that a company will do whatever it takes to satisfy a customer but Buck Rail does that.
Terry and Chris thank you so much for all your assistance to rectify my issue.
I’m very happy with this product, I’m very happy with the price and I recommend this item to my airgun buddies.
Great company - Great product!
Dave
Not too keen on how it looks, but it's just the way 3D prints look, nothing a bit of sandpaper and paint can't fix.
-Terry
No issues with clipping. Soon as I installed the adapter and suppressor combo on my avenger, groups tightened up like crazy, dime size groups at 50 yards and all I can hear from the gun is the hammer spring because this device works so well! Only downsize is that it makes the gun like 8 inches longer. Sure looks cool though!
Works just as well as other suppressors I have that cost three times as much.
Thank You
don't think it has enough volume to absorb the amount of air exiting the barrel.
Might work good on some smaller calibers or less powerful airguns.
Now, all that I hear is the valve click and the pellet hitting the target when it's fired.
Anyone who owns a Hatsan Jet 1 or 2 knows that they are the absolute WORST when it comes to sound
Even puts my DonnyFL Tanto to shame on this ear ringing party popper.
I VERY HIGHLY recommend this for anyone who owns the Jet series.
Thanks so much Terry for making my gun not having the neighbors an 8th if a mile away thinking I'm the victim of a terrorist attack, LOL.
KEEP UP THE AMAZING WORK!
Mike
will rate again after I see how it works
3D print quality is outstanding on the suppressor!
Good job!
Great quality product at a very reasonable price.
I'm ordering another for my at44 .25
And another for my AEA 30
Thanks
Steve
Chris is what every Ebay seller needs to be! If you have any problems with the suppressor he will gladly replace it and communicate with you. These suppressors are made to very tight and close specs and like anything else that you may purchase, there might be one that could be a little off specifications. Don't leave a bad review! Contact Buck-Rail first and he will work with you to keep you a happy customer.
Thank you Chris!
2 in 22 - 1 in 25
plus a bulldog and P-rod set ups.
Great Product that works as well as the expensive Aluminum cans.
Customer Service that you just don't find anymore, Thank You!
I'll be back!
MRC
A perfect fit on my Avenge-X. Looks good too!
Significantly quieter than other suppressors of greater cost.
It’s a no brainer … looks good and is super light.
Buck Rail for the win
It’s quiet !
1 in 177/22,Also no taper, for my LOUD Hatsan jet in 22, Now it is Defiantly backyard friendly, the impact on my backstop is louder than the gun.
Oh!, and by the way their CS is Just the BEST!!!
Don't hesitate!
Great product for a great price.
I was definately impressed by how much quieter the gun was.
I'm already recommending Buck Rail to my friends.
Sighted in my new JTS Aricuda Max with out it, so I was getting a ragged hole at 12Yds.
Screwed on the Superssor and , shots were off the whole target. Big problem clipping pellets. Contacted Manufacturer in Texas by email, got a quick response saying they were sending another at no cost.
Got the 2ND Supressor in and put it on the Air Rifle. Much better but still a long way off of Zero. Big adjustment on scope to get to Zero again, and shots were more inconsistent, with a bigger spread. At this point I do not trust the consistency of shot strings with this supressor on the gun.. Probably will not use it. Trust?
May order a competitors (much more expensive) suppressor as I have used them on my other Air Rifles with excellent shot consistency and results.
I'm getting 92-93 db from 3D printed baffles, But now I know.... Again the product is Very Well Done.
Thank you and will be buying from them in the future.
A++++++++++
Easy install, needing no additional adapters. Quick re-zero the scope, been head-shotting rats like nobody's business.
Noise level from a loud clap to a polite applause.
Customer Service is personalized & 2nd to NONE !
Very good customer service and fast shipping
Your failure,
Terry
Very well made ,i'm quit impressed with it ! Use it on my Crosman 2240 with 14.5" barrel. i'll most likely buy another !
Your Roaring 30cal will sound like a Daisy.
The product looks great ,but.doesnt work
I have them on my Sortie, Jet and Avenger. Substantially reduce the noise. And let me tell you that Buck-Rail's customer service and follow up is beyond comparison. And I appreciate that their veteran owned. I'm a service connected disabled war veteran myself.
Everything, from the product itself to the packaging that it comes in, is just 100% perfect in first class.
And the accuracy I get with my Avenger Bullpup in .177 is very good. Take a look at this 10 shot group from 100 feet from this morning, using this suppressor.
When I put it on the gun and test fired it was so quiet I thought it might have misfired. Took the moderator back off, fired. Nope! Loud again!
Totally satisfied. Will buy again the next gun that needs one!
Fantastic product at a fantastic price. Five star service as well.
Thank you!
2. Looks-Great
3. Fits like a Glove
Wish I had known about BUCK-RAIL
a long time ago !
Jim
I also purchased the 1/2 -20 UNF Suppressor. It just screwed onto the end of the adapter and your done. I do a lot of Back Yard Plinking and Pesting with my Aspen, my yard has Pecan trees and well fed Squirrels. I'm in a suburban setting and absolutely love how much quieter this rifle is on High/Low air settings with this adapter/suppressor set up.
The first time I shot it on high with the suppressor mounted, I had to look and see if I had put it on High power, because it sounded quieter than shots had been on low power without it. If you have a Seneca Aspen PCP.........Buy this you will be very Happy. Thanks Buck Rail
Effective, lightweight, incredible price/performance.
I have not found a more effective moderator for the P1322 and I've tried quite a few.
And - it was shipped FAST!
Delighted
Lets be real a moment, it’s a $40 3D printed airgun suppressor, and looks like one, but an AK looks rough too.
What was suprising was no poi shift at all on Umarex Origin. Well done fellas.
Good work guys
Gary
Greenwood indiana
Used it on the Gauntlet v1 .25cal (no mods)
Great Company
Would like to see an interrupted thread mount for a 1/2 twist on/off.... Will this be offered sometime soon?
I received the tapered .177 caliber suppressor today along with the Hatsan Jet I & II/ threaded adapter.
This is the second suppressor I ordered from you, the other was for a Seneca Dragonfly.
The Jet II was so loud out of the box, that the first shot really was painful to hear, thus requiring the wearing of
ear protection. It took all about 30 seconds to attach the suppressor and the first shot with it on, I still cannot
believe how quiet it is. I thought maybe it would dampen the sound a bit, but it basically eliminated the sound of
the pistol. Thank you for such a quality product at that price point.
Dave S.
Fast delivery although I live in Europe.
Recommend, recommend!!
Enclosed is a picture of a 3 shot group with the moderator installed
That said I will be doing business with you in the future but also recommending others to your site as well
Thanks again and job well done
Glenn Williams
Got a high dollar suppressor for my AEA Element at the same time. Buckrail sounds much better. Lower tone.
Got to check db meter next week to be sure.
I highly recomend these.
Wish I had seen these before I got the high dollar one.
I like the looks, it is quiet compared to an unmodified barrel. Shipping was fast.
Just a little more quality control and this thing will rock.
I apologize for just one star, wish it could be more, but the product as delivered is not useable.
Glenn Williams
My name Anouk and I am from the Netherlands.. I am very happy with the light weight suppressor and the adapter for my Crosman 2240 xl. Will buy again!!
Thank you so much... 👌
Makes it back yard friendly.
Also: fast shipping, tracking updates, great communication. Very satisfied!
Anywho, you've been refunded.
Sincerely,
Terry
I will be a return customer.
The tapered moderators are 1.200 ". I'm gonna try to stitch some suede on my straight one like they did in WW II .
One on my 2289 in picture that I wrapped for concealment [that gun is a work in progress] and the other is on my 760 pumpmaster 🤟
More QUALITY stuff from Terry and Co. ...:)
My umarex m92fs is now quiet enough to shoot on my balcony.
On my crosman icon I only get about a 45 to 50 percent reduction because a lot of the sound is hammer bounce and the pcp cylinder pinging , if you are considering purchasing don't hesitate. I really didn't need 2 moderators but The value is so great I wanted it while the prices are still reasonable
Thank you guys at Buck-Rail!
First time I used it on my AT 44 Hatsan.. Which is a loud gun.. The only thing I heard was the mechanical sounds..
I was shocked.
For 38 bucks.. Awesome deal..
Will use on my Galation and Avenger next.
POA is unchanged. Noise reduction down from a blast to a whisper. The hammer spring is louder than the muzzle blast. If only i could suppress the hammer spring .
I am impressed with your product and that you are thinking about the customer ($$$).. it’s hard to spend half the cost of my rifle on a suppressor when you have a family to support. Thanks again and hoping you make some m18x1 or 5/8x24 for the .50 cal
Observations:
1. Accuracy unaffected
2.Velocity unaffected (489 avg 21.14 HN Barracuda Match, the most accurate pellet for me)
3.Super quiet 92 db at 3 feet.
4. No Clipping.
5. No ears needed.
I watch Air Gun Detective and he recommended your product. He was right, great suppressor.
I really love your accessories and I recommend it to all the airgunners!!!
This is something I'm proud to own.
Looks great on my BSA gold star SE. Thank you for producing this product and I wish you and your family the best.
Terry's stuff is FIRST RATE ! Buy lots before the word gets out and he up's his prices....
We are a repeat customer.
So I wasn't tempted to grip the silencer while cocking and snap the moderator, I braided anout 4" of paracord under the sight group, over a base of 3M foam tape. It gives a nice, secure hold, preserves the finish and looks quite tactical.
For the price, it's a great item. Does the job. Looks badass.
I wanted to give this seller 5 stars because they made my situation with a defective unit right very quickly, but I did want to share my experience.
Do not attempt to over-crank this while screwing them on. It is plastic. I probably got a bum unit, but when I screwed this onto my walther parrus .177, it cracked at the bottom (seemingly from being over torqued). So just be mindful when attaching. I got a refund right away, and ordered a replacement
Fast Free Shipping! Perfect!
Fit Perfect!
Looks Perfect!
Weight Perfect!
Works Perfect!
How does it sound? Well the bolt release make as much sound as the discharge. Those are two distinct sounds on a Crosman 2240XL. Without it you can't hear the bolt release because the gas discharge is so loud. With it it sound as if there were a -9DB suppression. That's a lot. But don't call me on it. I will measure it and report back.
As others have said it is a great value for the money. Yes a $1-200 premium "moderator" will look better. I don't buy for looks, not that this looks bad. It does look good.
It's exactly what I would expect from a Brother Veteran. Thank you for your service and this piece of kit.
makes my modified 1377 SILENT
shipped within HOURS of ordering!!!