Description
This suppressor was designed and tested on the Crosman 2240. It will also work with the Crosman 2250, 2260, 760, 362, Drifter and with the extended Crosman barrels commonly swapped on the 13XX and 2240. The suppressor uses 7 cone-shaped interior baffles to dramatically reduce the report. Installation only requires you to remove the stock plastic cap at the end of the barrel, align the suppressor with the barrel, and press it on firmly by hand.
This suppressor is FDM printed in black Polycarbonate plastic and the ID is drilled to size. It should be a press fit for most folks, but if it is loose or gets loose over time you may need to use silicone or medium (blue) threadlocker to keep it in place. The Polycarbonate material can easily be sanded, filed, drilled, and painted if you want to customize it. If it affects accuracy you can drill out the internal diameter little by little until you get the results you want (this will rarely be necessary).
Also, see installation instructions and report comparison below (note that this suppressor has been upgraded in quality and the front sight post has been moved since this video was published. Also, there is no longer an alignment feature for the front sight post. You just turn it until it is aligned to your liking):
Paul (verified owner) –
Works as advertised! Quieted down my 2240 and was a super easy install! Thanks again!
Larry Spaulding –
After my previous 2 star review, Buck Rail refunded my purchase price of $22 for the 2240 press on suppressor that would not tighten down on my pistol. I have to rate their service and response a 5 out of 5 stars. A company that stands behind its products, and, when they don’t satisfy a customer’s needs, is willing to refund the purchase price is very rare today. I will order from them again with confidence. Thank you, Buck Rail.
Larry Spaulding (verified owner) –
I recently purchased this press on suppressor for my new Crossman 2240. I followed all of the directions and everything went well for the first two CO2 cartridges. I did notice that the suppressor turned easily and the front sight post needed to be realigned frequently. As I shot pellets out of my 2240 using a new CO2 cartridge, the entire suppressor flew off the barrel. So I reattached it, realigned the sight post and continued shooting. The same thing happened three more times. Then I quit. I have decided that I need to purchase a threaded adapter and a screw-on suppressor for my 2240. Otherwise I will be constantly re-attaching and realigning my suppressor, which is too bad because the suppressor does its job as far as quieting down my pellet gun.
ron gereaux (verified owner) –
Very fair price and fast shipping. Easy installation on the pistol and the only sound is the pellet hitting the target,
Will be able to use in the back yard without affecting the neighbors .
Sal DeSimone (verified owner) –
It looks cheap and maybe with some semi flat paint would look better but that is what I expected it to look like. I put this on my customized Benjamin Maximus that I tuned to be 12fpe to get maximum number of shots and iron sights. It fits the barrel perfectly! the front sight is excellent and I am using a williams peep for the rear. The gun is for squirrel hunting and is super accurate which this LDC doesnt affect or clip pellets. The gun really quite! It is works as well as the TKO I was using before I removed the scope. I would only like to see a pattern on it like the Daisy 880 LDC. Highly recommend this! Crosman/Benjamin is very good at using parts that will work with many platforms. Saves them tooling costs. 1322, 632, Maximus, 2240 all use the same barrels with exception to length, the diameters are the same.
James Barksdale (verified owner) –
High quality, fair price, fast shipping, easy installation, and most of all it works great!
James Barksdale
Distalowl (verified owner) –
I purchased the 2240 moderator to use on my 362. It was as simple as removing the front sight post and slipping it on. It makes such a noticeable difference and allows me to take night raiders in complete silence.
Les Schaub –
When I first started with air guns, the TKO was about the only low cost option. This works just as well. I have TKO’s on 3 air guns. This will be my go to suppressor for Crosman barrels. Works good – why pay more?
margaret steele (verified owner) –
Works great. Just buy it you will not be disappointed.
Andrew Wright (verified owner) –
Wow
About 70percent noise reduction
Does not drop at all at 20 yards
Very impressed
Steve Wooten (verified owner) –
This cut the sound of the pistol I half! Was easy to install……just wow! I think I have at least one of almost every suppressor Terry makes. Never a disappointment.
Jim (verified owner) –
Spent a lot of money on my modified 2240 and was not able to shoot it in my backyard. This suppressor makes it possible to fire the 2240 without the entire neighborhood aware of what I am doing. Very satisfied with this product.
Richard Cross (verified owner) –
Another great product Terry has to offer. This is the 5th suppressor I’ve gotten from him, along with a carbine kit. Every item is excellent, great prices, great communication and customer service.
Thank you!
H (verified owner) –
I have to concur with all the positives. This works! I put it on a 14.5″ barrel and it is no louder than a Daisy Red Ryder. I was concerned about my dog and she came outside to see what I was doing. Ha!
Matt (verified owner) –
I purchased this item a while back and finally got around to installing it today. I have to say I am more than 100% satisfied, the difference it makes has to be heard to be believed. I highly recommend this product.
Joseph Lawrence (verified owner) –
I installed one on my new Crosman 362. I measured loudness without the suppressor at 89.9 dBa for 8 pumps. With the suppressor, it dropped to 86.4 dBa for the same 8 pumps. Essentially, this suppressor makes the gun shoot with 8 pumps about as loud as the factory gun with 2 pumps. Installation was straightforward and it looks good on the gun. To the ear, this suppressor takes the ‘crack’ off the rifle report. I’m encouraged to buy another BR suppressor for my QB78s
Richard Thompson (verified owner) –
Fits on the new 632 also ! I got a 3.625 reduction in decibels using this silencer. Without 84.250 with a high of 87 dec. and a low of 83. With silencer 80.625 with a high of 82 and a low of 79 dec. 20 shots with and without for averaging. Fit was Super !!!! Keep up the great work Terry, way better than gamos whisper which increases decibels by 1 😂
Tynan Whitby (verified owner) –
This is my second suppressor from buck-rail behind the one printed for the chaser. I can’t say enough about these, they are an excellent addition to any air rifle.
Wendell Adams (verified owner) –
I went a slightly different route. I have a Daisy Powerline 853C with a Lothar Walther barrel. When I got it, it was missing the rear sight and part of the front.
I scoped it, but also wanted it quieter, and since the barrel is 7/16 like the Crosman barrels I ordered one without the front sight post.
Very snug fit, twisting /pushing it on. Much quieter! (shooting indoors)
Thanks for all the Great products, Terry!
george edward thayer (verified owner) –
I check with which of the decibel meter without the buckrail 81 1/2 with buckrail 61.3 I couldn’t believe the difference in the sound
george edward thayerK00 (verified owner) –
I installed the silencer on my 2300 S
Crosman and I was amazed at the difference in the sound without the silencer the 2300s pretty loud with the silencer it’s very very quiet Terry did an outstanding job making these silencers thank you so much. Merry Christmas and a Happy New Year to you and your family Terry
Joe B (verified owner) –
Excellent silencer. Very good Quality. Price is good. Quiets the 2240 nicely and looks good doing it. I have my eye on several other items for the 1377 as well. Customer service is top notch.
Thanks Terry
Thomas Keck (verified owner) –
Received two crosman 2240 silencers, great fit and very effective.
Thank you
CM –
Interestingly these are very effective. Mine is on a sheridan 2260 with an 18inch barrel. When I first took a shot with it I though I was running out of Co2. The pellet impact on a 1/4 inch steel plate is much louder that the report. Great deal! (also looks cool)
Bob (verified owner) –
Works great. Went from being really loud (annoying) to backyard friendly. Way more quiet than what you hear on video. Tight fit, no problem with it shifting on barrel. Fast shipment! Thanks Buck Rail!
Chris Sok (verified owner) –
This item made my 2300s a lot more backyard friendly. The only issue that I have with the silencer is that it would not stay on. I had to wrap the end of the barrel with a little bit of tape. It fixed the issue, but still not as tight of a fit like the plastic sight that comes with the 2240. I would definitely recommend this item.
James Wilson (verified owner) –
Slides on and fits snuggly. Got this after finishing customizing my crosman 2240 and it was a little too loud. This makes it so much quieter, a night and day difference! Going to order one for the 1077 next!!!
Joe –
Works great! Takes the noise level WAY down, this is the first 3d printed Can I have ever used and I am very surprised at how good it works.
Randy Evans (verified owner) –
Just received this silencer a few days ago, and already ordered a second one. Talk about making the 2240 back yard friendly. You won’t believe what your not hearing. It is quite a noise reduction. The fit is superb, and just presses on the barrel.
EdinGa (verified owner) –
Looks good and fits great!