This kit includes an ABS 3d printed threaded adapter, thread cap, and threaded suppressor. The adapter was designed exclusively for the Crosman 1077, but it has been reported that it is also compatible with the Crosman 2100 and Legacy 1000. The suppressor and thread cap are the same that are used on our M4-177, Daisy 880 and 13XX suppressor kit. The suppressor has 7 internal cone-shaped baffles. All the parts are 3d printed in the US and ship same or next business day.
Installation is simple. You’ll need a hammer to remove the front sight post/barrel cap. Hammer off the cap. Align the adapter with the tube from which the cap was removed. Make sure the barrel is aligned with the thru hole in the adapter and the sight post of the adapter is aligned with the slot in the tube. Insert it by hand, ensuring proper alignment. Tap it in with a hammer the rest of the way.
PLEASE NOTE: I used to make the suppressor with a larger opening than necessary to avoid any clipping issues, but have decided to tighten it up for maximum report suppression. This will increase the likelihood of pellet clipping. If the accuracy of your airgun is affected you may need to drill out your suppressor little by little until the accuracy is no longer affected. If you are not comfortable with this please do not purchase. But it’s not bad. The drill bit will self-align using the baffles like a pilot hole. Make sure you remove the suppressor from the airgun before you drill it out.
Check out the video below for more info. It’s kind of goofy, but you may find it to be helpful.