Additional information
| Weight | 0.075 lbs |
|---|---|
| Dimensions | 4.25 × 1.75 × 1 in |
| Weight | 0.08125 lbs |
|---|---|
| Dimensions | 5.7 × 1.1 × 1.1 in |
| Options | Tapered 1.06in, Non-Tapered 1.48in |
| Caliber | .177/.22 |
Crosman 1377/1322 Suppressor Kit
From: $25.00
Crosman 1377/1322 Suppressor Kit
***PLEASE READ THE FULL DESCRIPTION BEFORE PURCHASING!***
Please note that this adapter is not compatible with standard suppressor threads. It is made with a much coarser M20X2 thread pattern that makes it better suited for a polymer to polymer connection. The good news is that the compatible suppressors are very low priced!
This listing is for a threaded adapter/barrel band, thread protector, and UNI Suppressor for the Crosman 1377 or 1322 airgun. The suppressor has an expansion chamber and 8 cone-shaped interior baffles that significantly reduce the report of this airgun. The suppressor can be easily removed by unthreading it by hand. A cap is provided to protect the threads when the suppressor is not in use. To install you will need to remove the spring roll pin that secures the pump arm and end cap, replace the end cap with the adapter, and reinstall the roll pin.
The adapter is printed in super tough PA12 Nylon by another manufacturer in the Houston, TX. They use Multi Jet Fusion to print the part and bead blast it to give it a nice finish. I 3d print the Suppressor and Cap in ABS at my home in Texas. It also includes a set screw and allen key for securing the barrel. So it is an improvement over the stock barrel band.
If you have any issues with accuracy there are usually two causes:
- BREECH SCREW: It is likely the most despised feature on the 13XX and likes to come loose. Open the bolt and you’ll see the head of the breech screw where you would place a pellet. You will need a .05″ allen key to tighten it.
- MISALIGNMENT: I used to make the suppressor with a larger opening than necessary to avoid any clipping issues and to compensate for misalignment, but have decided to tighten it up for maximum report suppression. This will increase the likelihood of pellet clipping if there is the slightest bit of misalignment. There are many factors that can lead to misalignment (most of which will be on us), but rest assured that we will not leave you hanging if you have any issues. Let us know and we’ll take care of you!
Below is a video detailing the installation process. Please note that I added the set screw after publishing this video:
Thank you!
Ken Lupold
Watched the all the reviews of the uni suppressor online but the experience in real life is completely different. Dit not expect it to be this silent! Hope Terry designs a modular uni suppressor for this kit. I honestly couldn't be happier.
Owning a 3D printer I definitely can tell the quality here is premium. Regarding noise reduction, I wasn't expecting such a difference for airsoft but it's really amazing, all you hear is the sound of the spring when you shoot. Of course, from the target, you can still hear a bit of noise but it's much quieter (-10dB) and it will allow me to play in the garden without making too much noise and disturbing the neighbours.
Absolutely remarkable what a dramatic improvement these kits provided. These are absolutely must-have improvements. Highly recommended.
One note is I did apply a very small amount of silicone grease to the male threads of the adapter. Mad a much easier job of taking the moderator on/off. Awesome product!!!!
I will buy from this company again!
Jim W
UNI Adapter is highly recommended for its solid construction, ease of installation, and ability to enhance the performance of the Crosman 1377 and 1322 air pistols. It is a valuable accessory for those looking to customize and improve their shooting experience with these pistols.
Suppressor Kit is highly recommended for its excellent noise reduction capabilities, easy installation, and durable construction.
It is a great addition to the Crosman 1377 and 1322 air pistols, enhancing their performance and providing a more enjoyable shooting experience.
Thanks
The best customer service you'll ever experience.
Chris took care of it immediately. Thanks again Chris.
IF ANY OF YOU HAVE A PROBLEM DO NOT HESITATE TO CONTACT BUCK-RAIL!
They are all about customer satisfaction. And remember boys and girls....
BE POLITE!
Thank you
pistol makes. Not real bad, but noticeable in the neighborhood. Started
looking for solutions and found the Buck Rail suppressor. I watched the videos,
was impressed with the reduction in noise, and bought one of the 1/2-20 suppressors.
Based on how much I liked the 2240's suppressor, I decided to buy the
"1377/1322 UNI Adapter and Suppressor".
Followed the installation video and now the 1322 is noticeabe quieter than it was.
Another great product form Buck Rail.
Fully charged with 8 pumps and all you can hear is the hammer spring. Finally I can shoot inside without giving the wife a fit.
Should be an essential for any build.
request/fulfillment. Did some work to get the adapter to fit correctly. Silenced the gun and it is dead nuts on target.
Keep up the good work Terry
Mahalo Matt
Love the parts of the Crosman 1377 conversion kit I bought and installed.
Watch the installation of the adapter especially if the pump rolling pin is really a tight fit. I broke of the fins of the adapter the first time around. I just threw in a common threaded bolt the second time. I took not chances, and its all snug and tight.
The suppressor now causes the muzzle end to sound like a springy blurb dim sound. Very quiet!
Bought the minimalist Buttstock and a red dot sight with the BR mounts.
Great job BR on the innovation...
Easy installation (if you use a replacement hinge pin). I don't have a small enough hex wrench for those super tiny set screws.
I installed it on my CROSMAN 1322 and was surprised at how much it quieted down this barking, backyard-unfriendly air pistol.
Just for giggles, I like to do a moderator off/on/off/on comparison for my plinking buddies and to the man, they are astonished at how effective it is at quietening down the report even at the max of 10 pumps.
At 3-5 pumps all you hear is the hammer and impact on target ---AWESOME!
Install was simple and quick.
Worked so much better than expected. First couple times I checked the barrel to make sure it didn’t malfunction.
Happy to have a truly backyard friendly setup.
Now I need a better sight and an adapter for a 1322 with an extend barrel.
Thank you to Chris at Buck-Rail and their great customer service. I will definitely use more products from them.
As for the suppressor, it worked shockingly well; at 15 pumps you are basically only hearing the firing mechanism. It's an absolute steal at this price. The finish was much better than expected; if you've ever handled 3d printed parts before, you'll notice the finish quality is typically hot garbage but I only noticed some minor cosmetic imperfection on the muzzle brake/thread protector. I ordered the non tapered version, but if you plan on using the open sights you should probably get the tapered one since the larger od obscures most of the sight picture. I knew this was probably the case, but decided to risk it. For me it's not a big issue because I'm shooting at such close range that I don't have to account for drop.
So TLDR: Make sure you have a real punch and some patience before ordering, and buy the hinge pin so you never have to fight with that stupid thing again.
These are WAY better, and very quiet.
I found the install really easy with some gun oil around the rim and slightly heating the barrel for a couple seconds and it slides right on & off.
Back to the adapter and moderator, very effective. The gun now sounds as if it's broken. Mouse fart is not overrate description for the effectiveness of the moderator. Highly recommend.
All three pieces are as described.
Install took about ten minutes, removing hinge pin took most of it.
Finish on the adapter fits in with the rest of my 1377.
I did however give the nozzle and suppressor a light coat of matt black to knock down the shininess.
I've fired around twenty rounds so far and haven't noticed any chipping or deflection of pellet.
Very satisfied with sound level.
If you don't have one, tell Chris to light a fire and make more.
You won't be disappointed.
Squirgets Beware!
Cheers!
It goes to show how the Buck-Rail family takes care and appreciate its customers. The products they put out are great and the care they provide is the reason they have such a following!
Had a problem with one of my suppressors after a few weeks and Chris corrected the issue immediately!
If you need a suppressor for your air gun, look no further than Buck-Rail!
Amazing things for the avid budget minded air gunner.
I own 3 of these ....love them all..
The barrel fits a little tight. ( good thing)
I drill mine out to fit snug.. easily done by hand. Also I like to grind down the front sight a little to that way im not having to run up the rear sight so much. ( I sight my guns in at 25 yrds )
The uni silencers are crazy effective/efficient. At first i thought my gun was malfunctioning! They are that quiet 😎
I will DEFINITELY be purchasing more
buck-rail modds.
Crazy affordable.
Great Quality.
Did the steel breech, a small picatinny rail for a red dot and a screw type roll pin replacement to make it easier to disassemble the unit.
Makes it a super fun pinker.
Service from Buck-Rail has been fantastic with any problems , they really stand behind their products!
Looking forward to more Buck-Rail mods!
Thank you
Then you got to check out Buck Rail! Quality products that work for “cheap”!
And their customer service is superior! Great American company!
I had a little trouble with roll pin reassembly , roll pin hole didn't align quite correctly
and it shattered the adapter. I put the original end back on with no problem. I thought about just scrapping the whole thing about changed my mind and went online and ordered a replacement. A little disappointed to see it was $25 but I couldn't install the suppressor without the adapter. Chris caught the sale and reimbursed my money and sent the replacement at no cost. I was very, very careful with the new adapter. I had went online and bought a solid pin while waiting for the new adapter to arrive. As before I pre-aligned the hole with my roll pin punch the tried to slip the solid pin in the aligned holes. The pin was the exact size of the roll pin hole but was SS. I discovered that either the hole in the compressor tube was a little low or the the adapter was just a little high (?). I ran a drill through the assembly and the pin then easily went in and all was well. I took a few test shots with and without the suppressor and noticed the reduction in noise. You can still hear the spring but the air expulsion was definitely cut down. I had a very good experience with their customer service. Now on to the stock replacement with the adjustable stock.
Absolutely thrilled I can now shoot this rig off the back deck in my neighborhood without attracting the attention of all the old Wimmen just looking for any reason to call the cops on somebody! For some reason, they cant stand to see a guy enjoying himself! Thanks Buck-Rail for a wonderful product, fast shipping, and personal attention to my order! Love It!!!
Super quiet is a understatement. Also added the plumper pumper .. 2 mods that made a HUGE difference.
I do 95% of my plinking at four pumps, which is where I did my sound testing. Using a phone app to measure, my stock 1377 measured 69 db. With the suppressor installed, it measured 54 db. The sound reduction “to the ear” was considerable.
I like that the short muzzle-brake/thread protector was included. The fit, finish, and noise reduction are great. Buck Rail provides a great product and customer service at reasonable prices.
On the first shot after installation, I thought my gun had misfired. Almost like I had cocked the gun and fired it, without pumping any air into it.
love it.
I was pretty impressed with my previous results of the BEEMAN 2027 suppressor. That one really took the loud pop out of the BEEMAN so getting one for my CROSMAN 1322 was a no-brainer!
I am very happy with the results of the 1377/1322 suppressor. Easy installation and solid construction make adding one to my pistol a pleasant experience. The results speak for themselves. At 5 pumps all I heard was a soft ** pooof!** and thought that I forgot to load a pellet! At 10 pumps I can plink for hours at a Shoot-n-see target taped to a dirt-filled small cardboard box without disturbing any neighbor .
I can now relax worry-free while zeroing my air guns in at home for the best pellet and feel confident making accurate shots in the field.
Definitely buying another unit for my Crosman 1377 that I keep in pistol form.
Thanks, BUCK-RAIL for the awesome, affordable products and stellar personal customer service.!
Shipping was very fast and proud to support a Veteran owned business. I will be coming back for some more parts.
Thank You.
Soooo silent. The hammer is literally all you can hear from the gun.
Great job Terry.
Beautifully made products and very solid feeling.
The honeycomb finish is badass and ergonomic and gives the gun a modern tactical vibe.
The surpressor kind of wobbles left right when screwing on but when seated sits perfectly and aligns bang on.
As for the sound (or lack there of) it's a marked improvement and I'll feel much more stealthy hunting game or back yard plinking.
Absolutely transformed this already excellent 1322 pistol!
Will be returning for the folding stock!
Andy from Florida
PS: The plumper pumper for the 13XX models is a must.
Only two noises now, the hammer noise and the impact on my target. I can highly recommend this to anyone 👍👍
Noticable sound drop difference. I removed my rear sight, when I installed the steel breech and installed a red dot sight. So the front site issue is not a problem for me.
Highly recommend this item. Also recommend replacing pump pivot pin with stainless steel replacement, since you have to remove the PIN to install the suppressor mounts anyway.
Fast shipping and great service. The product works as advertised, the only sound is the sound of the pellet hitting the target. Easy installation and looks good on the pistol.
I bought the whole shebang of buck rail accessories. for both 1322 and 1377.
Decked out with my own AR buttstocks that I had laying around and bought the grips and rails too. all of these parts where superb.
I bought this Suppressor looking at all the reviews online so I bought one and had my buddy buy the other one. He tested it out on his 1322 and had Accuracy issues. So he sold it to me. Thinking I could fix it I followed all the directions after emailing what my issue was to fix the accuracy issues. A few hours later of testing and drilling, I had enough space for a 762x39 bullet to fit in it and it still had accuracy issues and the sound was more noticeable at 10 pumps. tried it again the suppressor my buddy sold me and still nothing. So I'm down x2 suppressors....
I don't know if I just got a bad batch or what, but as a suppressor it is awesome for sound moderation but about it. I don't know if the barrel band it came with was out of spec or what. This will still not dissuade me from [purchasing from Buckrail. Thank you again.
Sorry just frustrated.
Just received my set today, took 5 minutes to put it on a brand new 1377. I only fired five rounds through the gun before installing just to see how loud without suppression. After the conversion it is whisper quiet. The loudest noise is the pellet hitting cardboard 7 meters away. I can now shoot down my hallway without disturbing the neighbors!
Jerry
This is a must have for anyone's Crosman 13xx series no matter if you are in the suburbs, the city, or in the woods. It is a top of the line product that actually works better than you would expect and then some!! Shhhh is an understatement this thing is amazing and so is Customer Service , you will NOT BE DISAPPOINTED unless you don't buy from Buckrail on your next upgrade. I can't wait to make my next purchase from these guys as I know it will be top notch just like this product was. Thank you everyone at Buckrail and keep up the amazing work, I know I appreciate it and enjoy your products and definitely will be a return customer several times.
I'm hooked on these products!
It is astonishing as to how much quieter it is. The sound it makes while shooting is the impact on the target.
So pleased.
Get one. For $25 shipped tax included it’s an absolute no brainer.
Thanks Terry for a great product.
Thanks for your service.
Why waste this on the 1377?
Just ordered a new 1322 from Amazon then the Plumper Pumper and Grips with honeycomb.
When everything arrives I will build the ultimate Buck Rail American Classic?
Still debating on the Stock.......
Love your work brother!!!!!!!
Craftsmanship, installed in less than 5 minutes.
Thank you
Amazing design, amazing product.
Amazing company.
Cannot be happier with the build quality, speed of service, and great communication. This is an outstanding product at a very fair price.
I just got done installing the new front sight and a replacement roll pin and took out 5 cans at about 14 yards no problem using the new front sight coupled with a replacement peep sight I found on ebay. I'll do some actual target work when it's light out and warmer, but easy "angle of coke can" now. Thanks Terry!
With the thread protector on, there is virtually no change in sight picture. However, the sight post shortens a little with the suppressor attached. After a couple minutes, I was used to it and was still getting good "angle of coke can" accuracy.
Having said that, I'm looking for much better accuracy, so my next step will be to find a quality, easy, small optic to get well over the suppressor and tighten up my groups.
Also, I purchased this as part of a much bigger order as I have some other projects working too. I've seen a few folks ask about the threads on the suppressors and, given that I ordered one for another gun and they appear to be interchangeable, I'm *guessing* that the threads are standard across all the Buck-Rail suppressors. That's a very good thing.
Very sturdy, a bigger, robust front sight/barrel band ,thread size is bigger than 1/2-20 and that's fine.
LDC interchangeable with included thread protector (aka FLASH HIDER!) this is a Super set up, and makes my 1377 RC very quiet.
Thanks!
First of all, my order was shipped out the same day I placed it so that's excellent!
TLDR: the parts are an excellent fit, well printed and finished, and provide excellent sound reduction. Near 10db measured by me (phone app). The terms "moderator" and "ldc" are used interchangeably.
The replacement threaded nylon barrel bushing / pump piece is very well done. I have a few 3d printed items and this part looks and feels injection molded; no seams to speak of. The fit with stock parts is better than the original Crosman part and is very rigid. A great choice for those looking to add a moderator to this short barrel. Competitive metal pieces cost $70 plus so this is a no brainer part.
One thing I don't know, due to inexperience, is if this part is threaded 1/2x20 unf to accept other ldc. Though I don't know why you would bother with the performance of the stock ldc.
The ABS moderator itself:
Straight and threaded perfectly for the male part on the gun. Obvious print lines are present but at 1 foot away you can't tell; it's nothing some 500 grit and a rattle can can't overcome. The ABS is much stronger than I had anticipated and feels quite durable. No defects or baffle issues detected upon testing. New iron sights are useable with this set-up.
Total sound reduction: On 3 and 6 pumps is 10-15db with an android app. This was with 14.3 and 17gr projectiles. Noise reduction is significant to the point where target impact noise is louder. This is now 100% backyard friendly minus the space-gat look. I'm really happy with it.
Time will tell on some of the fittings and overall wear and tear but initial quality for $25 is through the roof. A great set of items that over-provide the advertised function and over deliver on quality.
I will be back for more!